maximum ratings and electrical characteristics ratings at 25 o c ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20%. se6l thru se1l sod-123fl maximum ratings (@ t a =25 o c unless otherwise noted) electrical characteristics (@t a =25 o c unless otherwise noted) dimensions in inches and (millimeters) ratings maximum recurrent peak reverse voltage maximum rms voltage maximum dc blocking voltage maximum average forward rectified current at t a = 55 o c peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (jedec method) typical thermal resistance (note 1) typical junction capacitance (note 2) symbol v rrm v dc i fsm c j t stg v rms units volts volts volts amps 1.0 15 0.9 130 15 10 amps 0 c/w 0 c/w 0 c storage temperature range r q ja typical thermal resistance (note 1) 30 r q jl i o pf operating temperature range t j se1l 50 150 -55 to + 150 0 c SE3L se4l 150 200 35 105 140 50 se2l 100 70 100 150 200 se5l 300210 300 se6l se1l SE3L se4l se2l se5l se6l 400400 280 2010-05rev: o characteristics maximum average reverse current at rated dc blocking voltage v f symbol i r m a maximum instantaneous forward voltage at 1.0a dc volts 5 350 @t a = 25 o c @t a = 100 o c m a units 0.95 1.25 trr maximum reverse recovery time (note 4) nsec 35 notes : 1. thermal resistance :mounted on pcb. 2. measured at 1 mhz and applied reverse voltage of 4.0 volts. 3. "fully rohs compliant","100% sn plating (pb-free)". 4. test conditions: i f = 0.5a, i r = -1.0a, i rr = -0.25a. .150 (3.8).142 (3.6) .052 (1.32).050 (1.28) .033 (0.85).030 (0.75) .044 (1.12).043 (1.08) .033 (0.85).030 (0.75) .035 (0.90).028 (0.70) .039 (1.00).035 (0.90) .077 (1.95) .069 (1.75) .008 (0.20) .114 (2.9).106 (2.7) features * high reliability * low leakage * low forward voltage * high current capability * super fast switching speed * high surge capability * good for switching mode circuit mechanical data * case: molded plastic * epoxy: device has ul flammability classification 94v-o * lead: mil-std-202e method 208c guaranteed * mounting position: any * weight: 0.016 gram 5. available in halogen-free epoxy by adding suffix -hf after the part nbr. surface mount super fast rectifier voltage range 50 to 400 volts current 1.0 ampere current squarad time i 2 t a 2 /sec downloaded from: http:///
ambient temperature, ( o c) 25 1.0 0 0 0.80.6 0.4 0.2 75 50 175 100 125 150 rating and characteristics curves ( se1l thru se6l ) fig.2 typical forward current derating curve fig.1 test circuit diagram and reverse recovery time characteristic average forward current, (a) trr +0.5a 50 w noninductive 10 w noninductive 0 -0.25a -1.0a 1cm set time base for14/1 ns/cm notes: 1 rise time = 7ns max. input impedance = 1 megohm. 22pf. 2. rise time = 10ns max. source impedance = 50 ohms. d.u.t 25 vdc(approx) ( - ) ( - ) ( + ) ( + ) 1non- inductive oscilloscope (note 1) pulse generator (note 2) single phasehalf wave 60hz resistive or inductive load instantaneous reverse current, (ua) percent of rated peak reverse voltage, (%) 0 0.1 10 1.0 1000 100 60 20 40 80 100 120 140 fig.3 typical reverse characteristics t a = 25 o c t a = 75 o c t a = 100 o c downloaded from: http:///
number of cycles at 60hz peak forward surge current, (a) instantaneous forward voltage, (v) 1 1 32 5 10 20 instantaneous forward current, (a) 1.00.3 0.1 0.030.01 3.0 10 20 10 5 50 100 2.5 2.0 1.5 1.0 0.5 0 3.0 3.5 rating and characteristics curves ( se1l thru se6l ) fig.4 typical instantaneous forward characteristics fig.5 maximum non-repetitive forward surge current reverse voltage, (v) junction capacitance, (pf) 4 6 4020 10 60 200100 0.2 0.1 21 0.4 2 1.0 4 10 20 40 100 fig.6 typical junction capacitance 8.3ms single half sine-wave(jeded method) pulse width=300us1% duty cycle t j = 25 o c t j = 25 o c se1l~se4l se1l~se4l se5l~se6l se5l~se6l downloaded from: http:///
mounting pad layout dimensions in inches and (millimeters) 0.165 ( 4.19) ref .052 min.(1.32 min.) .033 min.(0.85 min.) .044 min.(1.12 min.) .033 min.(0.85 min.) downloaded from: http:///
marking description y w s e x cathode band part no. year C code: (y:last digit of year& a:2010, b:2011) voltage-code 1-------50v 4-----200v 2-------100v 5-----300v 3-------150v 6-----400v week C code ( w: a, week 01~02; b, week 03~04 c, week 05~06 z week 51~52 ) downloaded from: http:///
packaging of diode and bridge rectifiers reel pack package gross weight(kg) ea per reel component space(mm) tape space (mm) carton size (mm) (mm) ea per carton reel dia packing code sod-123fl 2,500 --- --- 178 390*205*310 100,000 5.804 -w
rectron inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. rectron inc or anyone on its behalf assumes no responsibility or liabi- lity for any errors or inaccuracies. data sheet specifications and its information contained are intended to provide a product description only. "typical" paramet- ers which may be included on rectron data sheets and/ or specifications ca- n and do vary in different applications and actual performance may vary over ti- me. rectron inc does not assume any liability arising out of the application or use of any product or circuit. rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other rela- ted applications where a failure or malfunction of component or circuitry may di- rectly or indirectly cause injury or threaten a life without expressed written appr- oval of rectron inc. customers using or selling rectron components for use in such applications do so at their own risk and shall agree to fully indemnify rect- ron inc and its subsidiaries harmless against all claims, damages and expendit- ures. disclaimer notice downloaded from: http:///
|
